| AAJD |
Thread Class |
2A and 2B |
| AAJF |
Thread Direction |
Right-hand and right-hand |
| AAQL |
III Body Style |
Straight shape, internal coupling |
| ABHP |
Overall Length |
2.125 inches maximum |
| ADAV |
Overall Diameter |
1.344 inches maximum |
| ADZC |
Environmental Protection |
Moisture proof and salt water resistant and vibration proof |
| AFQR |
Threaded Device Type |
Back shell and coupling facility |
| AFQW |
Mating End Quantity |
1 |
| AFQX |
Contact Position Arrangement Style |
18-1 single mating end |
| AFQZ |
Contact Removability |
Removable single mating end all contact groupings |
| AFRC |
Contact Maximum Current Rating in Amps |
22.0 single mating end all contact groupings |
| AFRD |
Contact Maximum AC Voltage Rating in Volts |
200.0 single mating end 2ND contact grouping |
| AFRD |
Contact Maximum AC Voltage Rating in Volts |
500.0 single mating end 1ST contact grouping |
| AFRE |
Contact Maximum DC Voltage Rating in Volts |
250.0 single mating end 2ND contact grouping |
| AFRE |
Contact Maximum DC Voltage Rating in Volts |
700.0 single mating end 1ST contact grouping |
| AFRN |
Polarization Method |
Keyway or multiple keyway |
| AFRP |
Insert Position in DEG |
145.0 |
| AFRT |
Shell Type |
Solid |
| AFRV |
Connector Locking Method |
Internally threaded coupling ring |
| CMLP |
Thread Quantity per Inch |
18 and 18 |
| CQJX |
Nominal Thread Size |
1.062 inches and 1.125 inches |
| CQTM |
Terminal Location |
Back single mating end all contact groupings |
| CQTZ |
Contact Material |
Copper alloy single mating end all contact groupings |
| CQYH |
Contact Surface Treatment |
Gold single mating end all contact groupings |
| CQZG |
Insert Material |
Rubber silicone class Q single mating end |
| CRBJ |
Contact Surface Treatment Document and Classification |
MIL-G-45204 mil spec single treatment response single mating end all contact groupings |
| CSCF |
Terminal Type |
Crimp single mating end all contact groupings |
| CSPT |
Shell Material |
Aluminum alloy |
| CSWM |
Shell Surface Treatment |
Cadmium |
| CTBC |
Shell Surface Treatment Document and Classification |
QQ-P-416 ty 2, cl 3 fed spec single treatment response |
| CXCG |
Included Contact Quantity |
4 single mating end 1ST contact grouping |
| CXCG |
Included Contact Quantity |
6 single mating end 2ND contact grouping |
| CXCL |
Included Contact Type |
Round pin single mating end all contact groupings |
| FEAT |
Special Features |
In order to complete the connector assembly, the user must obtain/provide the backshell. standard versions may be ordered as nsn 5935-01-177-9556, P/N M85049/52-1-18W for the straight style, or nsn 5935-01-174-3671, P/N M85049/51-1-18W for the right angle style. |
| PMLC |
Precious Material and Location |
Contact surfaces gold |
| PMWT |
Precious Material and Weight |
0.010 gold grains, troy |
| PRMT |
Precious Material |
GOLD |
| TEST |
Test Data Document |
81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD |
Thread Series Designator |
Unef and unef |
| ZZZK |
Specification/Standard Data |
96906-MS3456 government standard |
